Piping/Cording Overlocker Presser Foot

Pipping foot in action
Cording/Shirring Foot
SKU: 550622

This Piping / Cording foot is used for sewing tape between two fabrics in one operation.

$49.00

Available Now!

To suit the following series: 14HD, 14SH and 14U (Suits 14U with a change of shank. Shank required is 554239)

Preparing your machine:
  • Needle: Left or both left and right
  • Stitch type: Three-thread overlock or four-thread overlock
  • Stitch type: 2-4mm
  • Differential feed lever: Normal position
  • Upper knife: Working position

Sewing:
  1. Place fabric with the right sides facing.
  2. Place cording (piping) in between upper and lower fabrics and insert fabrics under the cording foot with cording positioned in the groove under the foot.
  3. Sew while guiding both cording (piping) and fabric.

Note: Cording (piping) using bias tape and cord can also be done with this foot.

Reviews

There are no reviews yet.

Be the first to review “Piping/Cording Overlocker Presser Foot”

Your email address will not be published. Required fields are marked *